Phone unable to boot up nor into recovery mode. My GT-I9060I DS is unable to boot up completely and just hangs on the Samsung screen with a red exclamation mark in the top left hand corner. Also I am unable to boot it up into recover mode, it also hangs on the same screen mentioned above. It does however boot into Download mode but. 2- ملف boot.tar.md5. 3- تعاريف سامسونغ. 4- كمبيوتر بنظام ويندوز. 6- شحن الجوال 80% على الأقل. الطريقة: 1- من الجوال نقوم بتفعيل “وضع التصحيح“. 2- نقوم بإيقاف تشغيل الجوال. These files should have ‘.tar’ or ‘.tar.md5’ extension. Step 5: Boot Samsung Galaxy Phone into Download Mode. Before we start the process to install Samsung firmware using Odin, you need to restart your phone into downloading mode. For doing so, firstly switch off your mobile. Run the Odin 3 Flash tool and select the.tar.md5 or.tar Samsung firmware file in it. (If you want to learn how and in what order to load the firmware file in Odin 3 program, learn here.) Turn off your Samsung mobile/tab device and boot into download mode, and connect it to the computer.
Odin is a very useful tool that communicates with connected Android device (in download mode) and lets you install / flash ROM on your Android device. It’s an internal Samsung tool that is used for flashing firmware on devices. It’s available for Windows only. It’s very important to understand Odin and know about all the options that the program offers. Here is everything you need to know about the tool.
What is Odin?
Odin is a tool developed by Samsung to be used internally. It is used to flash firmware onto Android devices. You can flash .tar, .tar.md5 or .bin firmware files using Odin. There are different versions of Odin available. You can choose one depending on your device.
Understanding Odin Options
First, lets see what does the checkbox options do:
Auto Reboot: This option, when checked, reboots the system automatically after flashing is done.
Boot.tar.md5 I9060i
Re-Partition: So, what does re-partition do in Odin? It repartitions your device filesystem to the default (RFS).
F . Reset Time: It resets the flashing timer after the flash process is complete.
And here is what different buttons mean and what they are used for:
Boot.tar.md5 Gt-i9060i
PIT: Partition Information Table. If you checked the “Re-Partition” checkbox, you should also specify a .pit file to repartition the file system.
Bootloader: This button is used to flash the device Bootloader.
PDA: It refers to the firmware build. You can use this button to select the ROM or Kernel that you want to flash on to your device.
Phone: It refers to baseband / modem version.
CSC: Consumer Software Customization. Click this button and select the CSC file. It contains region or carrier specific files and may also include APN / MMS settings for that carrier.
Please be aware that you need to be very careful while using Odin. Especially with “Re-Partition” option you need to select the right PIT file. If you do not have the right .pit file, do not check “Re-Partition” option as it may brick your phone.
You need to select the right file against each button. Click on the button, browse and select the appropriate file. These files are usually found inside a firmware zip package. If used carefully and in the right way, Odin is very handy tool.
Comments are closed.